ABB TCC300 Скачать руководство пользователя страница 107

Страница: 107 / 716

3.17.7.2

Loading clone from a smart flash SD card

To load Clone files to another control which may or may not include DNP Configuration
and/or Multi

‑

user Password files proceed as follows.

Insert the Smart Flash SD Card (that includes the Clone file) into the control as
previously described.

Press the Right Arrow (COMM Hot Button) pushbutton. The control will go directly
to the "Memory Card" menu.

Press the Down pushbutton arrow as necessary to navigate to the "Clone Load"
menu item.

Press the ENT pushbutton. If prompted, enter a valid Level 2 Access Code. The
following will be displayed:

Confirm press ENT
Cancel press EXIT.

Press ENT. The control will display the following:

SN000001.cln
MM/DD/YYYY HH:MM →

Utilizing the arrow pushbuttons select the desired Clone File name, then press ENT.
The control will display the following:

Loading file Please wait ....
Loading... DNP CFG File

If DNP Configur ation file does not exist on the control the following will be
displayed:

DNP CFG File doesn't exist!
Loading... Multi-user Password

If Multi - user Password File file does not exist on the control the following will be
displayed:

Multi-user Pass Log File doesn't exist!

When the clone file has been loaded the control will display the following
"confirmation" screen:

Clone loaded Any key to continue

Press any key. The display will return to the "Clone load" screen.

3.17.8

Loading configuration files from a smart flash SD card

Configuration files may be loaded from a Smart Flash SD card. The following
Configuration files are available to load from the "Memory Card" menu:

•

DNP

•

IEC 61850 (if purchased)

1VAC388793-MB A

Section 3

Operation

TCC300

101

User Manual

Содержание TCC300












































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание TCC300

Отзывы:

ABB TCC300, Руководство пользователя, Страница: 107 / 716

Результаты поиска

Содержание TCC300

Отзывы: