manualshive.com logo in svg

ABB TCC300, Руководство пользователя, Страница: 687 / 716

Поделиться
Скачать
ABB TCC300 Скачать руководство пользователя страница 687

Section 13 

Appendix D IEC 61850 Configuration Editor

13.1 

IEC 61850 Configuration Editor

The IEC 61850 Configuration Editor includes the following features and functions:

CID IP Address

The IP Address of the Server (control). Setting the proper IP Address to match the control
IP Address, will enable a CLIENT software to establish a connection to the control.

File Revision

The file revision allows 0-99 different revisions of the CID file.

Buffered and UnBuffered Control Blocks

The user is able to choose 2 Buffered Report Control Blocks and 2 UnBuffered Report
Control Blocks.

Buffered Report Control Block

The events caused by trigger options such as data change, data update, quality change will
generate reports immediately. Events not transmitted are buffered to a practical limit for
later transmission. Events are not lost due to loss of connection or transport flow
constraints.

UnBuffered Report Control Block

The events caused by trigger options such as data change, data update, quality change will
generate reports immediately on a best effort basis. The reports are not guaranteed to be
delivered if there is loss of connection or if the connection is slow.

RptEna (Report Enable/Disable)

Enables or Disables the report.

RptID (Report Identifier)

The Report Identifier will be the client specified report identifier of the buffered report
control block or unbuffered control block that caused the generation of the report.

Having no rptID in the Report Control Block of the CID file will fail validation in Schema
1.4 (as rptID is required) and passes validation for Schema 3.0.

1VAC388793-MB A

Section 13

Appendix D IEC 61850 Configuration Editor

TCC300

681

User Manual

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов