ABB TCC300 Скачать руководство пользователя страница 268 | Manualshive

Страница: 268 / 716

ABB TCC300 Скачать руководство пользователя страница 268

The system clock includes the capability to automatically switch to and from daylight
savings time.

5.1.3.1

Setting time/date and daylight savings from the HMI

Whenever clock is reset and data logging is enabled, the data log should
be cleared.

1.

Press the Down Arrow (CNFG Hot Button) pushbutton to awaken the unit. The
menu will advance to "CONFIGURATION".

2.

Press the Down Arrow pushbutton once. The unit will display the following:

Tapchanger Type

3.

Press the Right/Left arrow pushbuttons, as necessary, until the "System Clock"
screen is displayed.

4.

Press the Down arrow pushbutton, as necessary, until the "Set Date and Time" dialog
screen is displayed.

Set Date and Time
MM/DD/YY HH:MM:SS

5.

Press the ENT pushbutton. If prompted, enter a valid Level 2 Access Code. The
following will be displayed:

Set Date and Time
MM/DD/YY HH:MM:SS C

The cursor will be positioned under the far left hand "Month"
element of the date. Utilizing the Up/Down arrow pushbuttons will
change the Month. Utilizing the Right/Left arrow pushbuttons will
move the cursor between each element of the date and time.

6.

Utilizing the arrow pushbuttons enter the desired Date and Time, then press the ENT
pushbutton.

7.

Press the Down arrow pushbutton, as necessary, until the "Daylight Savings" dialog
screen is displayed.

8.

Press the ENT pushbutton. If prompted, enter a valid Level 2 Access Code. The
following will be displayed:

Daylight Savings
disable C

9.

Utilizing the Up/Down arrow pushbuttons select "ENABLE", then press the ENT
pushbutton. The following will be displayed:

Daylight Savings
ENABLE

Section 5

1VAC388793-MB A

System setup

262

TCC300

User Manual

«
...
266
267
268
269
270
...
»

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов