ABB TCC300, Руководство пользователя, Страница: 632 / 716

setpoint, the operation of the TCC300 will be blocked, and the alarm output function will
be activated, if enabled. The settings for this screen are 5 mA to 200 mA in 1 mA
increments.
DVAR2 I Ratio
X.XX
(DVAr2 and DVAr2 KT) Provides a method to adjust the sensitivity to the circulating
current input versus the load current input. When the setting is 0.50, the control will be
0.50 times as sensitive to the VArs from the circulating current versus the load current
input. At 1.00, the control will be equally sensitive to both current inputs. At 2.00, the
control will be 2.00 times as sensitive to the VArs from circulating current input versus the
load current input. The settings for this screen are 0.50 to 2.00 in 0.01 increments. The
default setting is 1.00 to obtain equally sensitive current inputs.
Master/Follower
Master/Follower
None (Master,Follower)
Determines the controls status in the Master/Follower paralleling scheme. A "None"
setting allows the control to be removed from the scheme.
Paralleling Address
XX
The Paralleling Address is the unique address for each device in the network. (1-16).
Num. Devices
X
The number of total devices that are in the paralleling scheme (maximum of 16 inclusive
of the master).
T.P.R. Timeout
XXXXXX ms
The Tap Position Response Timeout is the period (1000-60000 ms) that the Master waits
following a tapchange and subsequent message sent to followers to make the same
tapchange that when expired will initiate a lockout if all followers have not issued
messages to the master confirming the follower tapchange.
Breaker Option
Section 10
1VAC388793-MB A
Appendix A HMI
626 TCC300
User Manual