manualshive.com logo in svg

ABB TCC300, Руководство пользователя, Страница: 31 / 716

Поделиться
Скачать
ABB TCC300 Скачать руководство пользователя страница 31

2.3 

Accessories

2.3.1 

TCC600 Communications Software

TCC600 is a Windows-based communications software program available for remote
control and metering of the TCC300 Tapchanger Control. It is designed to interface with
the microprocessor of the control through the standard USB Port (MODBUS®) and all
installed communication ports. The TCC600 software displays all pertinent operating
information. All operations that can be performed from the front panel user interface of the
control can be duplicated remotely, through TCC600.

•

Changing setpoint values. This includes those values for normal tapchanger control
operation, as well as custom configuration to the site.

•

Monitoring values. This includes measured and calculated values of real-time
operating parameters.

•

Data logging. The control can internally store various parameters at selected
intervals. The TCC600 program can download this data into a spreadsheet and
display. Alternatively, the PC can be programmed to poll the control and obtain a pre-
selected list of parameters at selected intervals. Also , TCC600 includes a utility to
convert the downloaded Datalog files from the Smart Flash SD Card into a
spreadsheet readable format.

•

Remote Control. The Remote Control feature allows the user to remotely raise or
lower one tap position as well as apply voltage reduction to the target control.

2.3.2 

Optional communication ports

The TCC300 Digital Tapchanger Control can be equipped with optional Bluetooth®
capability (COM2). COM2 is located on the top rear of the unit. COM2 utilizes the DNP
3.0 and MODBUS protocols.

TCC300 can also be equipped with an optional Ethernet Port through a RJ-45 Jack (10/100
Base-T) or Fiber Optic through ST connectors (100 Base

‑

Fx). These ports support DNP

over TCP/IP and MODBUS over TCP/IP.

2.3.3 

M‑2025B(D) Current Loop Interface Modules

The M

‑

2025B(D) are external self-contained interfaces designed to operate with the

tapchanger control for tap position by positive knowledge, for LTC transformer
applications. The modules connect to the current loop output of a tap position monitor
such as the 1250-series INCON Programmable Position Monitors. The tap position
monitor includes current loop outputs whose level corresponds linearly to any of a pre-

1VAC388793-MB A

Section 2

TCC300 overview

TCC300

25

User Manual

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов