ABB TCC300, Руководство пользователя, Страница: 671 / 716

11.8 Oscillograph setup
Number of Partitions 1 to 16 [5] (_______________)
Samples/Cycle 16, 32, 64 [32] (_______________)
Post Trigger Delay 5 to 95 % [50] (_______________)
Front Panel Message Enable [Enable] Disable
Pickup
Raise Contact Lower Contact VR Contact 1 VR Contact 2
Force Lower (Runback) Raise Tap Limit Lower Tap Limit Low Band
High Band Low Voltage Limit High Voltage Limit Auto Inhibit
Non Sequential Reverse Power Peak Motor Current Avg. Motor Curent
Motor Current Duration Voltage Harmonics Current Harmonics CBEMA 1
CBEMA 2 CBEMA 3 CBEMA 4 VAr Bias Active
Sealin Fail Alarm Active Sealin Fail Low Blk Act. Sealin Fail Raise Blk Act. Low Current Blk Act.
Motor Seal-in Input Neutral Input Counter Input Op Count Signal
Individual Tap Wear Alarm
Dropout
Raise Contact Lower Contact VR Contact 1 VR Contact 2
Force Lower (Runback) Raise Tap Limit Lower Tap Limit Low Band
High Band Low Voltage Limit High Voltage Limit Auto Inhibit
Non Sequential Reverse Power Voltage Harmonics Current Harmonics
CBEMA 1 CBEMA 2 CBEMA 3 CBEMA 4
VAr Bias Active Sealin Fail Alarm Act. Sealin Fail Low Blk Act. Sealin Fail Raise Blk Act.
Low Current Blk Act. Motor Seal-in Input Neutral Input Counter Input
Op Count Signal
Individual Tap Wear Alarm
1VAC388793-MB A
Section 11
Appendix B Setpoint, Configuration and Communication Record Forms
TCC300 665
User Manual