ABB TCC300 Скачать руководство пользователя страница 104

Страница: 104 / 716

3.17.5

Saving setpoints to a smart flash SD card

Insert the Smart Flash SD Card (that has adequate space available) into the control
as previously described.

Press the Right Arrow (COMM Hot Button) pushbutton. The control will go directly
to the "Memory Card" menu.

Press the Down pushbutton arrow as necessary to navigate to the "Save Setpoints"
menu item.

Press the ENT pushbutton. The control will respond with a "confirmation" message
screen.

Confirm press ENT
Cancel press EXIT.

Press the ENT pushbutton. The control will prompt for a file name to be entered.

Utilize the arrow pushbuttons to enter the desired file name.

Select ENT. The control will briefly display a progress screen and then display the
setpoints loaded screen.

Saving setpoints Please wait........
File saved! Any key to continue

3.17.6

Saving control data record files to a smart flash SD card

Control data record files may be saved to a Smart Flash SD card. The following data files
are available from the "Memory Card" menu:

•

Data Log (selectable data range)

•

Sequence of Events

•

Oscillograph Record (selectable partition)

•

Metering Data

•

Wakeup Screen Data

The following steps illustrate saving a Data Log file to the SD Card. The steps to save other
available data record files are similar.

Insert the Smart Flash SD Card (that has adequate space available) into the control
as previously described.

Press the Right Arrow (COMM Hot Button) pushbutton. The control will go directly
to the "Memory Card" menu.

Press the Down pushbutton arrow as necessary to navigate to the "Save Data Log"
menu item.

Press the ENT pushbutton. The control will respond with a "confirmation" message
screen.

Press ENT to view available data range

Press the ENT pushbutton. The control will display a range of data.

Section 3

1VAC388793-MB A

Operation

TCC300

User Manual

Содержание TCC300












































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание TCC300

Отзывы:

ABB TCC300, Руководство пользователя, Страница: 104 / 716

Результаты поиска

Содержание TCC300

Отзывы: