manualshive.com logo in svg

ABB TCC300, Руководство пользователя, Страница: 321 / 716

Поделиться
Скачать
ABB TCC300 Скачать руководство пользователя страница 321

4.

Select 

Save

. TCC600 will display a "Confirm Writing to Device" confirmation

screen.

5.

Select 

OK

. TCC600 will display a "New Password written successfully"

confirmation screen.

GUID-06B8C957-A062-4670-8934-7FFD9E7D556F V1 EN

Figure 247:

New Bluetooth Password Written Successfully Screen

6.

Select 

OK

. TCC600 will return to the "Bluetooth Information" Dialog screen.

5.14 

SCADA heartbeat

The purpose of the SCADA HeartBeat feature is to have sets of settings for the control and
switch between these settings sets based on the presence or absence of SCADA
communications to the control.

In order to determine if the SCADA communications is present a HeartBeat detection
algorithm is implemented.

There are four different types of SCADA HeartBeat modes:

•

SCADA HeartBeat for transformer control applications (LTC)

•

SCADA HeartBeat for regulator control applications (Regulator)

•

SCADA HeartBeat for Profile Switching

•

Manual HeartBeat Mode

The LTC, Regulator and Profile Switching have to be selected using TCC600®
Communications software or from the HMI, for these modes to be operational. But the
Manual HeartBeat Mode does not need to be selected for operation.

SCADA HeartBeat for LTC and Regulator

SCADA HeartBeat, when enabled, provides an additional set of control settings called
HeartBeat DNP points (HBBandcenter (Forward), HBBandwidth (Forward), etc), that are
only accessible through communications utilizing the DNP protocol. Although LTC and
Regulator modes are mutually inclusive (meaning if one of the options is selected, the

1VAC388793-MB A

Section 5

System setup

TCC300

315

User Manual

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов