manualshive.com logo in svg

ABB TCC300, Руководство пользователя, Страница: 393 / 716

Поделиться
Скачать
ABB TCC300 Скачать руководство пользователя страница 393

The user should always verify proper connections by consulting the nameplate on the
regulator tank. The user is cautioned that the nameplate on the control cabinet could
possibly be incorrect if the control has ever been replaced. If the serial number on the
control cabinet matches the serial number on the regulator tank or nameplate, the control
cabinet nameplate may be consulted for proper jumper configuration.

6.2.15.1 

Setting Regulator Type from the HMI

1.

Press the Down Arrow (CNFG Hot Button) pushbutton to wake the unit. The menu
will advance to "CONFIGURATION".

2.

Press the Down Arrow pushbutton once. The unit will display the following:

Tapchanger Type

3.

Press the Right or Left arrow pushbutton, as necessary, to navigate to the
"Nameplate" menu.

4.

Press the Down arrow pushbutton, as necessary, until the "Regulator Type" screen
is displayed.

5.

Press the ENT pushbutton. If prompted, enter a valid Level 2 Access Code. The
following will be displayed:

Regulator Type
TYPE A C

6.

Utilizing the Up/Down arrow pushbuttons, select the desired Regulator Type (Type
A or Type B), then press the ENT pushbutton.

6.2.15.2 

Setting Regulator Type from TCC600

1.

Select 

Setup/Configuration

 from the TCC600 toolbar. TCC600 will display the

Configuration dialog screen.

1VAC388793-MB A

Section 6

Configuration

TCC300

387

User Manual

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов