manualshive.com logo in svg

ABB TCC300, Руководство пользователя, Страница: 236 / 716

Поделиться
Скачать
ABB TCC300 Скачать руководство пользователя страница 236

GUID-4A34871F-E147-4A6F-9031-6744B687FFC1 V1 EN

Figure 162:

IEC Configuration File Transferring Status Screen

5.

When the file has been successfully downloaded from the control, TCC600 will
display the File Downloaded Successfully confirmation screen.

GUID-2A1B0BA3-F87F-4DE4-88E9-0E98D491AB1A V1 EN

Figure 163:

IEC Configuration File Downloaded Successfully Confirmation

Screen

4.10.6.9 

DNP

The Utility DNP Menu provides access to the DNP Configuration Editor, Source Address
Validation, Send DNP Configuration, Receive DNP Configuration File, DNP File
Identifier and UDP Port Settings features.

DNP Configuration Editor

The DNP Configuration Editor menu selection opens the TCC300 DNP Configuration
Editor dialog screen which provides the user with the following capabilities:

•

TCC300 default DNP configuration files (*.xml) can be loaded for editing or become
the basis for new DNP configuration files.

•

Selected DNP configuration files (*.xml) other than TCC300 default files can be
loaded for editing or become the basis for new DNP configuration files.

•

Binary Inputs, Analog Inputs, Binary/Control Outputs and Analog Outputs may be
added, edited or deleted.

•

Dummy positions may be added to allow SCADA table matching.

•

Variations may also be edited.

Section 4

1VAC388793-MB A

TCC600

230

TCC300

User Manual

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов