manualshive.com logo in svg

ABB TCC300, Руководство пользователя, Страница: 704 / 716

Поделиться
Скачать
ABB TCC300 Скачать руководство пользователя страница 704

GUID-E375AA47-312F-438C-864B-576D837C5B94 V1 EN

Figure 479:

Remote Ethernet File Update Utility (Firmware File) Dialog Screen

3.

Select "Firmware File".

4.

Select "Choose File". The utility will prompt for the desired ".upd" file and location.

5.

Select the ".upd" file. The utility will:
•

Populate the "Firmware File" field with the path/file name

•

Open the selected file and retrieve and decrypt the version information and
populate the "File Version" field with the firmware version

6.

Enter the IP Address and the Serial Number of the control to be updated.

7.

Select "Add". The information will be added to the list of controls to be updated.
Repeat Step 6 for any other controls to be updated.
The user can create a list of controls that will have their firmware updated. This list
can be saved if desired and can be retrieved for use at a later date. The list of controls
and their associated information (except for the "Update to Version") is stored in an
encrypted format.

Section 15

1VAC388793-MB A

Appendix F Remote Ethernet file update utility

698

TCC300

User Manual

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов