manualshive.com logo in svg

ABB TCC300, Руководство пользователя, Страница: 293 / 716

Поделиться
Скачать
ABB TCC300 Скачать руководство пользователя страница 293

5.8.1 

Comm Block Auto

Comm Block Auto allows the state of the "Block Auto Operation" communication
command to be saved or not saved when power has been lost. The default setting is
"DON'T SAVE".

The Comm Block Auto at power off setting requires the "Auto/Manual
Switch Type" in the configuration to be set to either "None" or "Toggle".

5.8.1.1 

Setting Comm Block Auto from the HMI

1.

Press the Down Arrow (CNFG Hot Button) pushbutton to awaken the unit. The
menu will advance to "CONFIGURATION".

2.

Press the Down Arrow pushbutton once. The unit will display the following:

Tapchanger Type

3.

Press the Right or Left arrow pushbutton, as necessary, to navigate to the
"Nameplate" menu.

4.

Press the Down arrow pushbutton, as necessary, until "Comm Block Auto" is
displayed.

5.

Press the ENT pushbutton. If prompted, enter a valid Level 2 Access Code. The
following will be displayed:

Comm Block auto DON'T SAVE C

6.

Utilizing the Up/Down arrow pushbuttons, select "DON'T SAVE or SAVE", then
press the ENT pushbutton. The selected setting will be displayed.

5.8.1.2 

Setting Comm Block Auto at power off from TCC600

The Comm Block Auto at Power Off setting requires the "Auto/Manual
Switch Type" in the configuration to be set to either "None" or "Toggle".

1.

Select 

Setup/Configuration

 from the TCC600® toolbar. TCC600 will display the

"Configuration" dialog screen.

1VAC388793-MB A

Section 5

System setup

TCC300

287

User Manual

Содержание TCC300













































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов