ABB RELION Series, Техническое руководство

Страница: 547 / 804

The operation of the subfunction can be described with a module diagram. All the
modules in the diagram are explained in the next sections.
A071108 V2 EN
Figure 285: Functional module diagram for counting circuit breaker operations
Operation counter
The operation counter counts the number of operations based on the state change of
the binary auxiliary contacts inputs
POSCLOSE
and
POSOPEN
.
The number of operations
NO_OPR
is available in the monitored data view on the
LHMI or through tools via communications. The old circuit breaker operation counter
value can be taken into use by writing the value to the
Counter initial Val parameter
and by setting the parameter Initial CB Rmn life in the clear menu from WHMI or
LHMI.
Alarm limit check
The
OPR_ALM
operation alarm is generated when the number of operations exceeds
the value set with the Alarm Op number threshold setting. However, if the number of
operations increases further and exceeds the limit value set with the Lockout Op
number setting, the
OPR_LO
output is activated.
The binary outputs
OPR_LO
and
OPR_ALM
are deactivated when the
BLOCK
input is
activated.
7.1.4.5
Accumulation of I
y
t
Accumulation of the I
y
t module calculates the accumulated energy.
The operation of the module can be described with a module diagram. All the modules
in the diagram are explained in the next sections.
1MRS758755 A
Section 7
Condition monitoring functions
REC615 and RER615 541
Technical Manual