ZyXEL Communications NAS540, User Manual

Page: 114 / 372

Chapter 10 Control Panel
Cloud Storage User’s Guide
114
Figure 67
UPnP for FTP Access
In the above example, UPnP creates a firewall rule and NAT port forwarding mapping to send FTP
traffic (using TCP port number 21) from the public IP address a.b.c.d to the NAS’s private IP
address of 192.168.1.20.
Use the NAS’s UPnP Port Mapping screen to configure the UPnP settings your Internet gateway
uses to allow access from the WAN (Internet) to services you select on the NAS. You can also set
which port Internet users need to use in order to access a specific service on the NAS.
Note: To use UPnP port mapping, your Internet gateway must have UPnP enabled.
If your Internet gateway supports Port Address Translation (PAT is sometimes included with a port
forwarding feature), you can have the Internet users use a different TCP port number from the one
the NAS uses for the service.
Figure 68
UPnP Port Address Translation for FTP Example
In the above example, the Internet gateway uses PAT to accept Internet user FTP sessions on port
2100, translate them to port 21, and forward them to the NAS.
10.5.1 UPnP and the NAS’s IP Address
It is recommended that the NAS use a static IP address (or a static DHCP IP address) if you will
allow access to the NAS from the Internet. The UPnP-created NAT mappings keep the IP address
the NAS had when you applied your settings in the
UPnP Port Mapping screen. They do not
automatically update if the NAS’s IP address changes.
Note: WAN access stops working if the NAS’s IP address changes.
For example, if the NAS’s IP address was 192.168.1.33 when you applied the UPnP Port Mapping
screen’s settings and the NAS later gets a new IP address of 192.168.1.34 through DHCP, WAN
access stops working because the Internet gateway still tries to forward traffic to IP address
192.168.1.33. Since you can no longer access the NAS from the WAN, you would have to access
the NAS from the LAN and re-apply your
UPnP Port Mapping screen settings to update the
Internet gateway’s UPnP port mappings.
TCP: 21
TCP: 21
192.168.1.20
a.b.c.d
TCP: 2100
TCP: 21
192.168.1.20
a.b.c.d