ZyXEL Communications NAS540, User Manual

Page: 328 / 372

Chapter 27 Protect
Cloud Storage User’s Guide
328
27.3.6 Edit Job: Step 1
Click Protect > Backup . Select a backup job from the list and click Edit Job to open the Edit Job
screen.
Figure 205
Protect > Backup > Edit: Step 1
The following table describes the labels in this screen.
Table 133
Protect > Backup > Edit: Step 1
LABEL DESCRIPTION
Job Settings
Job Name This field is read-only and shows the name of the backup job.
Job Description Enter a short description for the backup job.
Backup Type This field is read-only and shows the backup type.
Source folder(s)/
file(s) This is read-only and shows the path of the source folder for backup.
Backup Target This field is read-only and shows on which volume (whether internal or external) the
backup files are stored. If the target location is a remote NAS, this shows the remote IP
address.
Target Path This field is read-only and shows the target folder for the backup files.
Compression This field is read-only and shows whether the backup employs compression.
Compression reduces the size of the file that you want to back up. Backup is then faster,
but restoring may be slower, so if backup space is not a concern and recovery speed is,
then turn off compression.
Encryption This field is read-only and shows whether the backup employs encryption.
You can have the NAS use a password to encrypt the backup files.
Bandwidth For backups to a remote NAS, you can restrict the bandwidth to help prevent the
backups from using all of your network connection’s available bandwidth. This is more
important when backing up to a remote NAS or computer through the Internet.