ZyXEL Communications NAS540, User Manual

Page: 306 / 372

Chapter 26 Maintenance Screens
Cloud Storage User’s Guide
306
26.4 Log Screen
Click Maintenance > Log to open the following screen.
Use this screen to display all NAS logs. There are at most 512 entries in the log. Older logs are
removed by the system. You cannot download the log file via FTP or CIFS.
Execute Time
(hh:mm) Enter the time, day, and/or day of the month as appropriate for this power control
schedule entry. Leave more than 10 minutes between the execution times of the entries.
If the NAS turns off or restarts while a user is transferring files to or from the NAS, the
transfer fails. The user will need to restart the transfer.
The NAS skips a scheduled restart or power off if the execution time comes while the NAS
is doing any of the following:
• Resynchronizing a RAID
• Upgrading firmware
• Replacing the configuration file
If the NAS is turned off at the time when a restart or power off is scheduled, the NAS does
not perform the restart or power off.
If the NAS is turned on at the time when a power on is scheduled, the NAS does not
perform the power on.
Use this part of the screen to configure power on, power off, and reboot times.
Please select the
day of the month This is only available if you set the Frequency to Monthly .
Choose the day of each month for the power control schedule entry.
Every how many
weeks? This is only available if you set the Frequency to Weekly .
Enter the interval between weeks and choose the day of the week for the power control
schedule entry.
Every how many
days? This is only available if you set the Frequency to Daily .
Enter the interval between days for the power control schedule entry.
Add Click this to add the power control schedule to the list.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
Table 115
Maintenance > Power Management > Edit (continued)
LABEL DESCRIPTION