![YASKAWA CIPR-GA50C series Technical Manual Download Page 634](http://html2.mh-extra.com/html/yaskawa/cipr-ga50c-series/cipr-ga50c-series_technical-manual_3241765634.webp)
12.8 H: Terminal Function Selection
634
YASKAWA
SIEPC71061753A GA500 Technical Manual
ON : The output frequency is in the range of “
L4-03
±
L4-04
” and the range of frequency
reference
±
L4-04
.
OFF : The output frequency is not in the range of “
L4-03
±
L4-04
” nor the range of frequency
reference
±
L4-04
.
Figure 12.83 Example of User-set Speed Agree 2 (L4-03 Is Positive)
■
15: Frequency Detection 3
Setting Value
Function
Description
15
Frequency Detection 3
The terminal deactivates when the output frequency is higher than the value of
“
L4-03 [Speed Agree Detection Level(+/-)]
+
L4-
04 [Speed Agree Detection Width(+/-)]
”
. After the terminal deactivates, the terminal stays deactivated until the output frequency
is at the value of
L4-03
.
Note:
The detection level set with
L4-03
is a signed value. The drive will only detect in one direction.
ON : The output frequency is less than the value of
L4-03
or it is not more than the value of
L4-03
+
L4-04
.
OFF : The output frequency is higher than the value of
L4-03
+
L4-04
.
Figure 12.84 Example of Frequency Detection 3 (value of L4-03 Is Positive)
Note:
shows the result of the configuration when
L4-07 = 1 [Speed Agree Detection Selection = Detection Always Enabled]
. The
default setting of
L4-07
is
0 [No detection during baseblock]
. When the speed agreement detection selection is
“
No Detection during
Baseblock
”
, the terminal is deactivated when the drive output stops.
■
16: Frequency Detection 4
Setting Value
Function
Description
16
Frequency Detection 4
The terminal activates when the output frequency is higher than the value of
L4-03 [Speed Agree Detection Level(+/-)]
. After
the terminal activates, the terminal stays activated until the output frequency is at the value of
L4-03
-
L4-04
.
Note:
The detection level set with
L4-03
is a signed value. The drive will only detect in one direction.
ON : The output frequency is higher than the value of
L4-03
.
V/f
OLV
OLV/PM
OLV/PM AOLV/PM
EZOLV
V/f
OLV
OLV/PM
OLV/PM AOLV/PM
EZOLV
Summary of Contents for CIPR-GA50C series
