YASKAWA CIPR-GA50C series, Technical Manual

H2-28

(1548)

Comparator 2 Upper
Limit

Sets the upper limit detection level for comparator 2 as a percentage of the full scale
analog output for the monitor selected in

H2-26 [Comparator 2 Monitor Selection]

0.0%

(0.0 - 300.0%)

H2-29

(1549)

Comparator 2 Hysteresis

Sets the hysteresis level for comparator 2 as a percentage of the full scale analog output
for the monitor selected in

H2-26 [Comparator 2 Monitor Selection]

0.0%

(0.0 - 10.0%)

H2-30

(154A)

Comparator 2 On-Delay
Time

Sets the on-delay time for comparator 2.

0.0 s

(0.0 - 600.0 s)

H2-31

(154B)

Comparator 2 Off-Delay
Time

Sets the off-delay time for comparator 2.

0.0 s

(0.0 - 600.0 s)

H2-32

(159A)

Comparator 1 Filter
Time

Sets the time constant that is applied to the primary delay filter used for the analog
output of the monitor selected with

H2-20 [Comparator 1 Monitor Selection]

0.0s

(0.0 - 10.0 s)

H2-33

(159B)

Comparator1 Protection
Selection

Sets drive operation when it detects

CP1 [Comparator1 Limit Fault]

0 : Ramp to Stop

1 : Coast to Stop

2 : Fast Stop (Use C1-09)

3 : Alarm Only

4 : Digital Output Only

(0 - 4)

H2-34

(159C)

Comparator 2 Filter
Time

Sets the time constant that is applied to the primary delay filter used for the analog
output of the monitor selected with

H2-26 [Comparator 2 Monitor Selection]

0.0s

(0.0 - 10.0 s)

H2-35

(159D)

Comparator2 Protection
Selection

Sets drive operation when it detects

CP2 [Comparator2 Limit Fault]

0 : Ramp to Stop

1 : Coast to Stop

2 : Fast Stop (Use C1-09)

3 : Alarm Only

4 : Digital Output Only

(0 - 4)

H2-36

(159E)

Comparator 1 Ineffective
Time

Sets the length of time that

CP1 [Comparator1 Limit Fault]

is disabled.

0.0 s

(0.0 - 1000.0 s)

H2-37

(159F)

Comparator 2 Ineffective
Time

Sets the length of time that

CP2 [Comparator2 Limit Fault]

is disabled.

0.0 s

(0.0 - 1000.0 s)

H2-40

(0B58)

Mbus Reg 15E0h bit0
Output Func

Sets the MFDO for bit 0 of MEMOBUS register 15E0 (Hex.).

(0 - 1FF)

H2-41

(0B59)

Mbus Reg 15E0h bit1
Output Func

Sets the MFDO for bit 1 of MEMOBUS register 15E0 (Hex.).

(0 - 1FF)

H2-42

(0B5A)

Mbus Reg 15E0h bit2
Output Func

Sets the MFDO for bit 2 of MEMOBUS register 15E0 (Hex.).

(0 - 1FF)

H2-60

(1B46)

Expert

Term MA,MB,MC
Secondary Function

Sets the second function for terminal MA/MB-MC. Outputs the logical calculation
results of the terminals assigned to functions by

H2-01 [Term MA,MB,MC Function

Selection]

(0 - FF)

H2-61

(1B47)

Expert

Term MA,MB,MC
Logical Operation

Sets the logical operation for the functions set in

H2-01 [Term MA,MB,MC Function

Selection]

and

H2-60 [Term MA,MB,MC Secondary Function]

(0 - 8)

H2-62

(1B48)

Expert

Term MA,MB,MC
Minimum ON Time

Sets the minimum ON time that the drive uses to output the logical calculation results
from terminal MA/MB-MC.

0.1 s

(0.0 - 25.0 s)

H2-63

(1B49)

Expert

Terminal P1 Secondary
Function

Sets the second function for terminal P1-C1. Outputs the logical calculation results of
the terminals assigned to functions by

H2-02 [Term P1 Function Selection]

(0 - FF)

H2-64

(1B4A)

Expert

Terminal P1 Logical
Operation

Sets the logical operation for the functions set in

H2-02 [Term P1 Function Selection]

and

H2-63 [Terminal P1 Secondary Function]

(0 - 8)

H2-65

(1B4B)

Expert

Terminal P1 Minimum
ON Time

Sets the minimum ON time used to output the logical calculation results from terminal
P1-C1.

0.1 s

(0.0 - 25.0 s)