Xerox Wide Format 6030, User Manual

Page: 430 / 448

PT Specifies the fill spacing. y y
PU Raises the pen. y y y
PW Specifies the pen width. y y
QL
Sets the plot quality. y n
RA Fills in a square determined by the current pen
position and the specified X and Y coordinates. y y y
RF Defines a pattern used for area filling. y y
RO Rotates the coordinate system. y y y
RP
Specifies the output count. y y
RR Fills in a square determined by the current pen
position and the relative coordinates from the point. y y y
RT Plots an arc from the current pen position to a point
specified by two relative values. y y
SA Selects an auxiliary character set. y y y
SB Specifies a font type for labels. y n
SC Assigns a user unit value to a scaling point. y y y
SD Specifies the standard font for labels. y y
SG Selects a pen group. [Interpreted as the SP command] y n
SI Specifies the character size by absolute values. y y y
SL Specifies the slant for the characters. y y y
SM
Draws a specified character after moving the pen. y y y
SP Specifies a pen type. y y y
SR
Specifies the character size by relative values. y y y
SS Specifies a font specified by the SD command. y y y
ST
Sets the plot quality. y n
SV Selects a pattern type for vector and area filling. y n
TD
Specifies whether to execute the functions of control
characters or to print the control characters at label
drawing. y y
TL Specifies transparency or opaque when white areas
are overlaid. y y
TR Specifies the length of ticks drawn on the coordinate
axis. y y
Com-
mand
Command Meaning and action HP-GL HP-GL/2
6030/6050
Wide Format