Xerox Wide Format 6030 User Manual Download Page 256

Page: 256 / 448

8.10

Change Default Language

The [Change default language] selection on the Print Services on Web [Properties] tab

can be used to change the language that is displayed when Print Services on Web is

started. The language can be changed to English, French, Italian, German, Spanish, or

Portuguese.

This setting becomes effective after the machine is switched off and then on again.

Select the [

Change default language] selection on the Print Services on Web

[Properties] tab.

The [Change default language] fields will display on the right pane of the window.

Select the required language selection from the pull down list.

Click the [Apply] button to save the change, or [Cancel] to undo it.

Power the machine off and then on for the change to take effect.

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands