Xerox Wide Format 6030 User Manual Download Page 354

Page: 354 / 448

10.4

Managing the Job and Error Logs

Log data for print jobs is saved in the following two logs.

•

Job Log

•

Error Log

The user can perform the following log management tasks from the printer control panel.

•

Set up the system to print the job log automatically.

•

Print the log data.

•

Delete (clear) the job and error logs.

Job Log

This section explains the procedures for managing the job log from the printer control

panel.

Procedure

Press the <

> key with [JOB LOGGING]

displayed.

Press the <

> key with [JOB LOG] displayed.

Select the relevant operations with the use of the

> and <

> keys, and then press the <

key.

The [SETTING], [PRINT], and [CLEAR]
parameters will be displayed in that order.

Select [Auto Mode] with the use of the <

and <

> keys, and then press the <

> key.

JOB LOGGING

JOB LOG

SETTING

Auto Mode

When [SETTING] is selected

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands