Xerox Wide Format 6030 User Manual Download Page 2

Page: 2 / 448

Xerox Corporation

Global Knowledge & Language Services

800 Phillips Road Bldg. 845-17S

Webster, NY 14580

Printed in the United States of America.

righted material and information now allowed by statutory or judicial

law or hereinafter granted, including without limitation, material gener-

ated from the software programs that are displayed on the screen such

as styles, templates, icons, screen displays, looks, etc.

AIX is a trademark of International Business Machines Corporation.

AutoCAD is a registered trademark of AutoDesk, Inc.

HDI is an acronym for Heidi® Device Interface. Heidi is a registered

trademark of AutoDesk, Inc.

HP-GL is a trademark of Hewlett-Packard Company.

Macintosh and AppleTalk are registered trademarks of Apple Com-

puter, Inc.

Microsoft® Windows, Windows 95/98, Windows Me, Windows NT®,

Windows® XP, Windows® 2000, Windows® Server 2003 are trade-

marks of Microsoft Corporation.

Internet Explorer is a copyright protected program of Microsoft Corpo-

ration.

Netscape is a registered trademark of Netscape Communications Cor-

poration.

Solaris and SunOS are registered trademarks of Sun Microsystems, Inc.

UNIX is a registered trademark of Open Group Company Limited

XEROX®, The Document Company®, the digital X®, Xerox

6030/6050 Wide Format Printer, and Versatec are the trademarks of or

licensed to XEROX CORPORATION.

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands