Xerox Wide Format 6030 User Manual Download Page 180

Page: 180 / 448

Changing Program Sort Presets

Select [Program Sort Preset] on

the [Custom Presets – Copy

Features] screen.

Press the [Change] button and

select the program number to be

changed.

Select the distribution group

destination number, and enter the

number of copies to be made with

the use of the keypad.

Press the [Done] button.

The screen will return to the [Program
Sort Preset] screen.

Press the [Done] button when all
values have been set.

The specified parameters will be
saved accordingly, and the screen will
return to the [Custom Presets – Copy
Features] screen.

Custom Presets – Copy Features

Done

Switch Feature
Buttons...

Default Copy
Feature...

R/E Preset...

Variable
Length Preset.

Media Type
fot Auto mode.
Auto Image
Rotate Preset.
Other Copy
Presets...

Program Sort
Preset...

Output Order
Preset...

Program Sort

Done

Store

Delete

Change

1 100

101 200

201 300

Previ-
ous

•

The buttons outlined in dotted
lines are not saved and cannot
be selected.

•

Press the [Next] button if the
number is to be over 20, the
[101 - 200] button if it is over
100, and the [201 - 300]
button if it is over 200.

Cancel

Change : No.1

Done

1/4

Previ-
ous

Press the [Next] button if the

number is over 11.

Program Sort

Done

Store

Delete

Change

1 100

101 200

201 300

Previ-
ous

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands