Xerox Wide Format 6030 User Manual Download Page 8

Page: 8 / 448

This product must be connected to a protective earth circuit.

This product is supplied with a plug that has a protective earth pin. This plug will fit

only into an earthed electrical outlet. This is a safety feature. To avoid risk of elec-

tric shock, contact your electrician to replace the electrical outlet if you are unable

to insert the plug into it. Never use an earthed adapter plug to connect the product

to an electrical outlet that lacks an earth connection terminal.

Operator Accessible Areas

This equipment has been designed to restrict operator access to safe areas only.

Operator access to hazardous areas is restricted with covers or guards, which

would require a tool to remove. Never remove these covers or guards.

Maintenance

Any operator product maintenance procedures will be described in the user docu-

mentation supplied with the product. Do not to carry out any maintenance on this

product, which is not described in the customer documentation.

Cleaning Your Product

Before cleaning this product, unplug the product from the electrical outlet. Always

use materials specifically designated for this product; the use of other materials

may result in poor performance and may create a hazardous situation. Do not use

aerosol cleaners; they may be explosive and flammable under certain circum-

stances.

WARNING

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands