Xerox Wide Format 6030 User Manual Download Page 297

Page: 297 / 448

Settings

The settings for this function are as follows.

Menu Item

Description

Pen No.

Sets up the pen number, in a range from 0 to 98.

Width

Sets the line width in a range from 0 to 511, where a setting of
1 = 0.0635 mm. The actual width of the line will be n

0.0635,

with the line width set to n. The default setting is [2].

Lines may be printed in patches if the width is set to [1].

Color

Sets the line color to [

BLACK

] or [

WHITE

The default setting is

[BLACK]

End style

Sets the end of the line to [

SQUARE

], [

ROUND

], [

EXTEND

], or

[

TRIANGLE

]. The default setting is

[SQUARE]

Refer to the illustrations on the next page for more details.

Joint style

Sets joint processing for lines to [

UNJOINT

], [

BEVEL

[

MITER

], [

ROUND

[TRIANGLE]

, or

[MITERED/BEVELED]

The default setting is

[MITER]

Refer to the illustrations on the next page for more details.

This setting is only valid for HP-GL and HP-GL/2 EA, EP,

ER, FP, RA, RR, and PE.

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands