Xerox Wide Format 6030, User Manual

Page: 221 / 448

Centronics (optional)
The Centronics communication parameters are presented below.
Menu Item Description
Ack Mode The Ack mode is selected from [ MODE0 ], [ MODE1 ],
[ MODE2 ], [ MODE3 ], and [ MODE7 ].
The default setting is [MODE0].
DMA Timeout The timeout value for data input is entered within a range of 1 to
255 seconds. The default setting is [5 sec].
EOP Timeout Determines if the EOP Timeout will be enabled [TIMEOUT] or
disabled [NO_TIMEOUT]. If set to [TIMEOUT], a Timeout
Value must be entered. The timeout value is entered within a
range of 0 to 99 seconds.
The default setting is [10 sec].
Job Separation Sets the job separation. The default setting is [NO].
[
YES ] Starts conversion processing once the command
that recognizes the end of the data is received,
even if this occurs midway through the file.
[ NO ] Performs the spooling process on the hard disk
until a timeout is issued.
• If a value higher than [255] is entered for the DMA Timeout value, [255] will be set
as the value.
• Changes to the [Ack Mode] and [DMA Timeout] values will have no effect on
operations.