Xerox Wide Format 6030 User Manual Download Page 208

Page: 208 / 448

Entering Numbers and Characters

This section provides examples of how to enter numbers and characters.

Select the menu item that you want to set

up.

Press the <

> key.

The current setting for the selected item will

display.

Set up the first number using the <

> and

> keys. The value will increase or

decrease sequentially between 0 and 9.

Press the <

> key.

The cursor will move to the second number.

Set up the second number using the <

and <

> keys.

Set up all other numbers in the same way.

Press the <Set> key after all numbers are

set up.

The [*] mark will display beside the new

value.

Press the <

> key to move the cursor to

the first number.

Press the <

> key to return to the higher

level menu.

In the example on the left, press the <

key to display [2].

Press the <

> key to return to the

previous number.

SYSTEM PARAMETER

Low power mode1

Timer Value

> key

Timer Value

> key

Timer Value

> key

Timer Value

> key

Timer Value

<Set> key

Timer Value

> key

MENU
SYSTEM PARAMETER

> key

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands