Xerox Wide Format 6030 User Manual Download Page 407

Page: 407 / 448

Jams in the Feeder (Roll Media)

Media jams in the roll feeder(s) are caused by incorrect media loading methods and

defects in the media feeding mechanism. Reload the media according to the following

procedure.

Procedure

Open the media tray.

Rewind the media on the roll from which the

jam has occurred by rotating it toward you. If

the lead edge of the media is folded or damaged

in any way, cut it straight across with the cutter

or scissors.

Rotate the roll until the lead edge is gripped in

the roller.

Avoid damaging the paper.

Refer to sections "1.14 Cutting Roll
Media" and " Cutting Roll Media
Manually"

for instructions on how to

cut the lead edge of the roll media.

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands