Xerox Wide Format 6030 User Manual Download Page 358

Page: 358 / 448

10.5

Reprinting

This function reprints the file that was most recently printed. The copy quantity (1 to 99)

also can be specified.

Procedure

Press the <

> key with [OFFLINE PLOT]

displayed on the parameter selection screen.

Press the <

> key.

Press the <

> key.

Select the print quantity with the <

> and <

keys, and then press the <Set> key.

Press the <

> key after selecting the print

quantity.

Press the <Set> key when [SET: to Print.] is

displayed.

The file will reprint.

Reprinting can not be performed if a copy job has been performed after the print job.

In order for reprinting to work, a job must be saved in memory.

Move the cursor to the right and left with

the use of the <

> and <

> keys.

OFFLINE PLOT

REPLOT

Printed Copies

REPLOT

SET : to Print.

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands