Xerox Wide Format 6030 User Manual Download Page 189

Page: 189 / 448

Scanning Procedures

This section explains the basic scanning procedures.

Scanner Mode Procedure

Activate the scanner mode from the host PC.

[Ready to Scan] will display on the copier control panel touch screen.

Insert the document in the scanner face down, with the edge aligned with the

document insertion guide.

The machine will scan the document, and the scan data will be transmitted to
the host PC.

Terminate the scanner mode at the host PC. The copier/printer will return to

the copier mode.

If scanning is set to manual start, press the <Start> key at this time.

Scanner

Ready to Scan.
To stop scanning,
operate from external device.

1. Load documents face down.

2. Control scanning from

external device.

Scanner

Scanning in progress...

Ready to send data to
external device.

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands