Xerox Wide Format 6030 User Manual Download Page 293

Page: 293 / 448

Color Option

Sets the pen drawing color at a specified density or at black when a color command other

than black is specified.

Settings

The settings for this function are as follows.

This setting is only valid for HP-GL and Versatec data.

Menu Item

Description

White Mode

Determines how lines will be drawn when the image information
specifies a color other than black.
[

ENABLE

] Draws lines with pens of varying densities that

correspond to the specified colors.
Can draw visible lines on a black background.

[

DISABLE]

Draws all lines with the black pen.
Lines are not visible when they are drawn on a black
background.

The default setting is

[ON]

for HP-GL;

[OFF]

for Versatec.

Summary of Contents for Wide Format 6030

































































































































































































































































































































































































































































Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands

Xerox Wide Format 6030, User Manual

Search results

Summary of Contents for Wide Format 6030

Reviews:

Related manuals for Wide Format 6030

Brands by name

Popular brands