manualshive.com logo in svg

Xerox Legacy 4110, User Manual

Share
Download
Xerox Legacy 4110 User Manual Download Page 90

Xerox 4590/4110 Copier/Printer User Guide

2-62

2. Copy

When Enlargement% is Selected

You can specify a different ratio for the height and width. 

1.

From the Poster screen, select 

Enlargement%

. 

2.

Use the 

up

/

down

 buttons to specify the height and width 

ratios. 

3.

Select 

Save 

to keep your selection.

„

X (width) Y (height)

Set the height and width ratios within the range from 100 to 400% 

in 1% increments. 

Repeat Image 

An document image can be copied on one sheet of paper 
repeatedly for a specified number of times. 
When the copy ratio is set to Auto, the repeated copies of the 

image are reduced to fit on the selected paper. You can also 

specify how the repeated copies of the image are arranged. 

NOTE: When making repeat copies at the same size as the 
document image, specify a number of repeats that will fit on the 
paper. 

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands