Xerox Legacy 4110 Page 343 User Manual Download

Page: 343 / 520

Xerox 4590/4110 Copier/Printer User Guide

9-19

9. Machine Status

Job Status

From the

Print Report/List

screen, select

Job Status

Select the report/list to be output.

Press the

Start

button.

Job History Report

The data for the last 50 jobs is printed.
You can also automatically print a

Job History Report

when 50

jobs are exceeded. If automatic print is set, all job results are

printed.

For the settings, refer to “Reports” in the System Administration

Guide.

Error History Report

Information about the errors occurring in the machine is printed.

Information is printed for the most recent 50 errors.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands