Xerox Legacy 4110, User Manual, Page: 68 / 520

Xerox 4590/4110 Copier/Printer User Guide 2-40
2. Copy
When
Equal Opposite Edges
is Selected:
You can specify the same value for the top and bottom edges or
left and right edges.
1.
From the
All Services
screen, select
Copy
, then the
Scan
Options
tab. From the
Scan Options
screen that appears,
select
Edge Erase
and then
Equal Opposite Edges
.
2. Use the
up
and
down
buttons to enter the value for the
Edge Erase.
3.
Select
Save
to save the changes.
„
Top & Bottom Edges
Shadows at the top and bottom of the document are erased.
Edges at the top and bottom are erased in accordance with the
direction that the document was loaded. You can set the border
erase width within the range from 0 to 1.9 inches (0 to 50 mm) in
0.1 inch or 1 mm increments.
„
Left & Right Edges
Shadows on the left and right of the document are erased. Edges
on the left and right are erased in accordance with the direction
that the document was loaded. You can set the border erase width
within the range from 0 to 1.9 inches (0 to 50 mm) in 0.1 inch or 1
mm increments.
„
Center
Shadows in the center of documents such as booklets or
documents with facing pages are erased. You can set the center
erase width within the range from 0 to 1.9 inches (0 to 50 mm) in
0.1 inch or 1 mm increments.
„
Original Orientation
Refer to “Original Orientation” on page 2-49.