Xerox Legacy 4110 User Manual Download Page 19

Page: 19 / 520

Xerox 4590/4110 Copier/Printer User Guide

1-5

1. Product overview

No.

Component

Function

Left cover

Open to access the top cover and to remove paper jams.

Front cover

Open to remove paper jams.

Confirmation indicator

This lights when a document is loaded correctly.

Document guides

Use these guides to align the edges of the document.

Document feeder tray

Load documents here.

Document output tray

Retrieve scanned documents here.

Document Stopper

Holds large document, such as 11 x 17 in./A3, in place. When not in use,

position it upward.

Waste toner container

cover

Open this cover when removing the waste toner bottle.

Waste toner container

Collects used toner.

Fuser

Fuses the printed image on the paper.

The Fuser is extremely hot and will cause injury if jam clearing

instructions are not followed.

Lever

Use in order to pull out the transfer module.

Transfer module

Copies the image from the drum to the paper. Open this to remove

paper jams.

Toner cartridge

Provides toner for laying down the image on the paper.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 19 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: