Xerox Legacy 4110 Page 453 User Manual Download

Page: 453 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-75

11. Problem Solving

Paper Jams at Output Area of Finisher

This section describes how to remedy paper jams that occur at the

following locations:

•

Paper jams at output tray

•

Paper jams at finisher tray

•

Paper jams at booklet output tray

NOTE: Remedies differ according to the paper jam location.

Follow the instructions displayed and remove the jammed
paper.

Paper jams at output tray

Remove jammed paper from the output tray.

NOTE: If paper is torn, check for any torn pieces of paper inside

the machine.

Open and close the right cover of the finisher.

NOTE: A message will be displayed and the machine will not

operate if the Finisher right cover is even slightly open.

Paper jams at finisher tray

Remove jammed paper from the finisher tray.

NOTE: If paper is torn, check for any torn pieces of paper inside

the machine.

Open and close the right cover of the finisher.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands