Xerox Legacy 4110 User Manual Download Page 51

Page: 51 / 520

Xerox 4590/4110 Copier/Printer User Guide

2-23

2. Copy

Select

Non-standard Size

Enter the paper size using the

down

left

, and

right

buttons.

Select the paper type.

NOTE: Select the up button to display the previous screen and
select the down button to display the next screen.

Select

Save

to save the changes.

2 Sided (Making 2 sided Copies)

Copies of 1 sided and 2 sided documents can be made on one

side or both sides.

From the

Basic Copying

screen, in the

2 Sided

area, make a

selection.

1 Sided

When you select the

1-1 Sided

button you are making fast,

simplex to simplex copies.

2 Sided (Head to Head)

The

1-2 Sided

option allows you to create double-sided,

head-to-

head

copies - for example, presentations, and bulletins.

2 Sided (Head to Toe)

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 51 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: