Xerox Legacy 4110 User Manual Download Page 193

Page: 193 / 520

Xerox 4590/4110 Copier/Printer User Guide

4-17

4. Mailbox Management

Mailbox - Insert Separators Screen

You can separate the main document and insert a separator into it

after its target page. After inserting the separator, it will be merged

into the main document.

KEY POINT:

After inserting a separator, if the page that comes

after it is not in succession to it (i.e., text page and cover page

without images; 2 pages with different chapter division/separator

settings; 2 pages with different copy or print settings; 2 pages with

different paper size/ paper tray settings), the page before and after

a target page will not be linked with one another.

KEY POINT:

You cannot insert a document between a cover page

and a separator.

NOTE: After inserting a separator, side 1and side 2 of the pages
after a target page may switch positions with one another.

Select

Insert Separator

Select a paper tray for separators to be inserted.

Use [

] and [

] or the numeric keypad to enter the number of

separators to be inserted.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Brands by name

Popular brands