Xerox Legacy 4110 Page 400 User Manual Download

Page: 400 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-22

11. Problem Solving

The Printed Result is not what was Expected

This section describes solutions for situations in which the print

result is different from that expected.

No stapling done

Cause

The number of pages to staple exceeds 100 or the

number exceeds 50 with staple cartridge for 50

sheets.

Action

Staple-enabled number of pages is 50 or lower with

the staple cartridge for 50 sheets and 100 or lower

with the staple cartridge for 100 sheets. For Z-folding,

staple-enabled number of pages is 10 or 5 sheets

depending on the size of the paper used. For

booklet, up to 15 sheets can be stapled at one

time. Reduce the number of printed pages to 50 or

100 or lower, depending on the staple cartridge used.

No folding

Cause

The folder is not attached.

Action

Check the options attached with this printer, and

reset the printer configuration

Printing performed with

a different paper size

Cause

Paper size provided is different from the specified

tray size.

Action

Change the paper size set in the tray, or change print

options to specify a tray that contains the appropriate

size.

The image is cut off on

the edge of the paper

Cause

Image exceeds the printable area of the machine.

Action

Increase the printable area of the machine, or

decrease the document print area.

The printed font differs

from the font specified

on the computer

Cause

Font replacement is configured on the print driver.

Action

Check the font replacement table.

Cause

Non-standard fonts are used for printing.

Action

Check the application or print driver settings.

If PostScript is being used, download the required

fonts.

Printing is slow

Cause

The print mode specifies Print Quality.

Action

When printing image data that has image quality as a

priority, such as pictures, the print speed decreases.

Turn off the quality priority in the print mode.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands