Xerox Legacy 4110 Page 174 User Manual Download

Page: 174 / 520

Xerox 4590/4110 Copier/Printer User Guide

3-50

3. Scan

File Name Conflict

You can set the procedure when file name is overlapped in the

same mailbox specified.

NOTE: File Name Conflict is available only is item name shown,
when using the Scan to FTP/SMB feature.

From the

All Services

screen, select

Scan to FTP/SMB

Select the

Output Format

tab and then select

File Name

Conflict

Select any item.

Cancel Job (No save)

If a file of the same name already exists in the forwarding

destination, cancel the job and do not save.

Change Name and Save

If a file of the same name already exists in the forwarding

destination, automatically change the file name and save. A 4-digit

number (0001 - 9999) is automatically added to the end of the file

name.

Overwrite Name and Save

Replace the existing file with the new one and save.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands