Xerox Legacy 4110 User Manual Download Page 132

Page: 132 / 520

Xerox 4590/4110 Copier/Printer User Guide

3-8

3. Scan

Load the next document.

Press the

Start

button.

If you have more documents, load the next document and

press the

Start

button.

When all documents have been scanned, select

Last

Original

Step 4 Confirm the Scan Job in the Job Status

Press the

Job Status

button.

Check the job status.

NOTE: Select

the up or down buttons to navigate between

screens

If the job is short, it will not appear in Current and
Pending Jobs. Instead, check Completed Jobs.

Job Status

button

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Xerox Legacy 4110, User Manual, Page: 132 / 520

Search results

Summary of Contents for Legacy 4110

Reviews: