manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 390 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 390

Xerox 4590/4110 Copier/Printer User Guide

11-12

11. Problem Solving

White dots 

appear in black 

filled areas. 

The paper in use is 

unsuitable.

Load suitable paper.
Refer to “Load paper in the trays” on 

page 7-4.

The drum cartridge is 

depleted or damaged.

Contact the Customer Support Center.

Printed toner 
smudges when 

rubbed with your 

finger.

Toner is not 

fused to the 

paper.

The paper is 

dirtied with toner. 

Is the paper damp?

Replace with paper from a new ream.
Refer to “Load paper in the trays” on 

page 7-4.

The paper in use is 

unsuitable.

Load suitable paper.
Refer to “Load paper in the trays” on 

page 7-4.

The entire paper 

area is printed 

black. 

The drum cartridge is 

depleted or damaged.

Contact the Customer Support Center.

A probable cause is a high-

voltage power supply 

malfunction.

Contact the Customer Support Center.

Nothing is 

printed. 

Two or more sheets of 

paper are being fed 

simultaneously 

(double-feed).

Fan the paper well and reset.
Refer to “Load paper in the trays” on 

page 7-4.

A probable cause is a 

high-voltage power supply 

malfunction.

Contact the Customer Support Center.

Symptoms

Check

Remedy

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments