Xerox Legacy 4110 Page 382 User Manual Download

Page: 382 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-4

11. Problem Solving

Machine Trouble

If you think some trouble is occurring on the machine, check the

machine status again.

Precision components and high-voltage power supplies are used on the machine.

Never open or remove machine covers that are screwed shut unless specifically

instructed in the User Guide. A high-voltage component can cause electric shocks.

When opening the panels and covers that are screwed shut to install or detach

optional accessories, be sure to follow instructions in the respective the User Guide.

Do not try to alter the machine configuration or modify any parts. Doing so might

cause machine malfunction or fire.

Symptoms

Check

Remedy

Power is not

switched On.

Is the power switch on the

machine turned off?

Turn the power switch on.
Refer to “Power on/off” on page 1-12.

Is the power cord plugged

into the power outlet?

Turn the power switch off and then firmly

plug in the power cord. Then turn the

power switch on.
Refer to “Power on/off” on page 1-12.

Is the power cord

disconnected from the

machine or the rear of the

rack?
Is power of the correct

voltage being supplied?

Make sure that the power supply is

200 -240 V (volts), 15 A (amperes).

Make sure that power of capacity

compatible with the specified maximum

power consumption of the machine

(2.8 - 3.1 KVA) is being supplied.

Display is dark.

Is the

Power Saver

button

on?

The machine is in the Power Saver mode.

Press the

Power Saver

button on the

Control Panel to cancel the Power Saver

mode.
Refer to “Power Saver Mode” on page 1-

14.

Is the brightness dial set too

low?

Use the brightness dial to adjust display

brightness.
Refer to “User Interface (UI)” on page 1-9.

Unable to print,

unable to copy.

Is a message displayed on

the Control Panel's display?

Follow the instructions displayed to solve

the problem.

Is the printer mode

Offline

? Press the

Machine Status

button and

confirm the

Printer Mode

in the

Machine

Status

screen. If

Printer Mode

Offline

select

Online

in the

Printer Mode

screen.

Is the power cord

disconnected from the

machine or the rear of the

rack?

Turn the power switch off and then firmly

plug in the power cord. Then turn the

power switch on.
Refer to “Power on/off” on page 1-12.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands