Xerox Legacy 4110 Page 404 User Manual Download

Page: 404 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-26

11. Problem Solving

Unable to Send the Scanned Document over the Network (FTP/SMB)

This section describes solutions when scanned documents cannot

be sent over the network.

Operation halts during

scanning

Cause

Is the file size too big?

Action

Reduce the resolution, or choose a compressed

output file format, and rescan.

Refer to “File Format” on page 3-33, or “Scan

Resolution” on page 3-38.

Unable to forward over

the network

Cause

Is the server entered correctly?

Action

Check the inputted server.

Cause

Is the save location entered correctly?

Action

Check the save location.

Cause

When using SMB, is the Shared Name entered

correctly?

Action

Check the Shared Name.

Cause

When using SMB (UNC Format), is the save location

entered correctly?

Action

Check the save location.

Cause

Is the login name entered correctly?

Action

Check the login name.

Cause

Is the password entered correctly?

Action

Check the password.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands