Xerox Legacy 4110 Page 420 User Manual Download

Page: 420 / 520

Xerox 4590/4110 Copier/Printer User Guide

11-42

11. Problem Solving

027-770

Cause

PDL (Printer Description Language) error detected by

the controller while processing a network print job.

Remedy

Cancel and resend the print job. If problem continues,

reboot both the controller and the printer and resend

job. If the problem persists, call the Customer Support

Centre for further help/instructions.

027-771

Cause

Disk full error message on the controller.

Remedy

Cancel job. Delete unwanted files from the

controller. Resend the network print job.

027-796

Cause

When the machine is configured to only print attached

documents when received by mail, a message with no

attachments is discarded upon receipt.

Remedy

To print the mail body or header information as well,

change settings in the CentreWare Internet Services

Properties screen.

Refer to “E-mail Print” in the System Administration Guide.

027-797

Cause

Invalid received mail output destination.

Remedy

Specify a correct output destination and send the mail

again.

062-211

Cause

An error occurred in the document feeder.

Remedy

Contact the Customer Support Center.

062-220

Cause

The document scanner malfunctioned.

Remedy

Contact the Customer Support Center.

062-277

Cause

A communications error occurred between the document

scan unit and the document feeder.

Remedy

Contact the Customer Support Center.

062-278

Cause

An error occurred in the document scanner.

Remedy

Power-cycle the machine. If the document scanner error

is not fixed by performing the relevant remedy, contact

the Customer Support Center.

062-790

Cause

The scanned document is copy-protected.

Remedy

Refer to “It’s illegal...” on page 13-10, and check to see if

the document can be copied.

063-210

Refer to 062-211.

065-210

Cause

An error occurred with the machine.

Remedy

Contact the Customer Support Center.

065-215

065-216

Cause

An error occurred in the document scanner.

Remedy

Power-cycle the machine. If the document scanner error

is not fixed by performing the relevant remedy, contact

the Customer Support Center.

071-210

Cause

Paper Tray 1 malfunctioned.

Remedy

Contact the Customer Support Center. Trays other than

Paper Tray 1 can be used.

Error Code

Category

Cause and Remedy

C P S M O

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands

Xerox Legacy 4110, User Manual

Search results

Summary of Contents for Legacy 4110

Reviews:

Related manuals for Legacy 4110

Brands by name

Popular brands