manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 435 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 435

Xerox 4590/4110 Copier/Printer User Guide

11-57

11. Problem Solving

Paper Jams in Lower Left Cover

The following section describes how to remedy paper jams that 

occur at the left cover of the body.

NOTE: This procedure shows how to clear a jam without the HCF 

(Trays 6 and 7) being present. If you have an HCF, open 
the Front Cover to optional Trays 6 and 7 to access this 
area.

1.

Open the lower left cover while gripping the release lever.

2.

Remove the jammed paper. 

NOTE: If paper is torn, check for any torn pieces of paper inside 

the machine.

3.

Close the lower left cover.

NOTE: A message will be displayed and the machine will not 

operate if the lower left cover is even slightly open.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments