Xerox Legacy 4110, User Manual, Page: 46 / 520

Xerox 4590/4110 Copier/Printer User Guide 2-18
2. Copy
1.
Select
Independent X-Y%
.
2.
To specify the height and width ratios, use the
up
and
down
buttons.
„
Auto
Copies are made with the height and width ratios set automatically
to match the paper size. If this option is selected, a check mark is
added.
„
Auto (Copy All)
The height and width ratios are set automatically to match the
paper size and the document is copied at a slightly reduced size to
prevent image loss. If this option is selected, a check mark
appears in the
Copy All
check box.
KEY POINT:
If you select
Copy All
, you need to set border erase
dimensions to 0 inches (0 mm), depending on the size of the
original document. Note that even if the border erase is set to 0
inches (0 mm), the edge of the copied document sometimes
appears dirty or image loss sometimes occurs depending of the
size of the original.
„
X (width) Y (height)
Set the height and width ratios within the range from 25 to 400% in
1% increments.