manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 460 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 460

Xerox 4590/4110 Copier/Printer User Guide

11-82

11. Problem Solving

3.

If the document is not caught in the input section, you can 
remove it. 

4.

If there are instructions to turn the wheel, turn the green wheel 
to eject the document upward. 

KEY POINT:

If the document is stuck, do not pull on it directly.The 

document could be damaged.

5.

If there are instructions to open the inner cover, lift up the lever 
with the green seal on it, and open the inner cover. Remove 

the jammed document. 

6.

Turn the green wheel to eject the document upward.

NOTE: If the document is stuck, do not pull on it directly. The 

document could be damaged.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments