manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 229 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 229

Xerox 4590/4110 Copier/Printer User Guide

4-53

4. Mailbox Management

2 Sided Printing

This feature allows you to make 2 sided copies from 1 or 2 sided 

documents.

NOTE: Copies may not be made correctly depending on the 
orientation of the document.

1.

From the 

All Services 

window, select 

Check Mailbox 

and 

then 

Copy & Print Jobs

.

 

2.

Select the mailbox you want to open and then select 

Change 

Settings/Print

. Select 

2 Sided Printing

. 

3.

Select 

Save 

to keep your choice.

„

Document Specified

Uses the same settings as when the document was saved.

„

Off

Documents are not printed onto 2-sided.

„

Head to Head

Both sides are printed in the same direction.

„

Head to Toe

Both sides are printed in opposite direction.

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments