manualshive.com logo in svg

Xerox Legacy 4110, User Manual, Page: 417 / 520

Share
Download
Xerox Legacy 4110 User Manual Download Page 417

Xerox 4590/4110 Copier/Printer User Guide

11-39

11. Problem Solving

016-786





Cause

 

When using the scan feature, hard disk capacity is 

insufficient for writing to a file.

Remedy

  Either remove unnecessary data from the hard disk to 

increase free disk space or initialize the hard disk.

016-787



Cause

 

Invalid server IP address specified in job template. 

Remedy

  Specify the correct job template.

016-788



Cause

 

Failed to load a file from the Web browser. 

Remedy

  Perform the following actions, and try again.

• Reload the browser page
• Restart the browser
• Power-cycle the machine

016-789

 

Cause

 

Insufficient space available for mail processing. 

Processing was interrupted.

Remedy

  Reduce resolution or reduction/enlargement ratio to 

decrease the data size, or send in several pieces.

016-791





Cause

 

In the scanner (save to PC) or job template scan, the 

forwarding destination or job template save location 

could not be accessed.

Remedy

  Check whether you can access the specified forwarding 

destination.

016-792



Cause

 

Specified job history could not be acquired when printing 

Job Counter Report

Remedy

  Specified job history does not exist.

016-793



Cause

 

The hard disk has run out free space.

Remedy

  Either remove unnecessary data from the hard disk to 

increase free disk space or initialize the hard disk.

016-799



Cause

 

An illegal print parameter is included.

Remedy

  Confirm the print data and option and specify the print 

data again.

021-750

021-751

021-770

021-771

021-772



Cause

 

During an inspection or maintenance request a 

transmission error occurred and our Customer Support 

Center could not be contacted.

Remedy

  Check that the phone lines are connected and try 

sending an inspection or maintenance request again 

after a short time.

If the error persists, contact the Customer Support 

Center.

024--746



Cause

 

A feature (one of paper size, tray, output tray, or 2 sided 

printing) that is incompatible with the specified paper 

quality has been specified.

Remedy

  Check the print data.

024-747



Cause

 

An illegal print parameter combination was set. For 

example, a non-standard size was specified and 

Tray Selection was set to Auto.

Remedy

  Check the print data. In the above case, select Tray 5 

(Bypass).

Error Code

Category

Cause and Remedy

C P S M O

Summary of Contents for Legacy 4110









































































































































































































































































































































































































































































































































Reviews:

No comments